lubricating oil purification machinery
2.environmental friendly machine
Used lubricating oil purification machinery,lower price,environmental friendly machine,strong
What TYA can do for you?
1. Removing gas, water, impurities from used oil
2. Strong demulsification
3. Restoring technical parameters and performance
4. Prolonging oil service life
5. Ensuring industrial equipment working normally and safely
1. Double primary filters structure, three-stage filtration system
(primary filter, seconday filter, fine filter) with gradually
incresing filtration precision, removing impurities as much as
2. Large area three-dimensional flash distillation technology,
removing gas and water efficiently.
3. Strong ability of demulsification, separating oil and water
4. Humanized design, all necessary control buttons and indicator
lights are equipped on the control panel which provides easy
control for operation and supervision.
5.High-efficiency electric heating system, controlled by automatic
constant temperature controller, heating the oil uniformity,
avoiding oil deterioration, less power consumption.
6. Equipped with double-infrared oil level controller: During the
running of the machine, it will control the oil pump start and stop
automatically, ensuring the balance between oil inlet and outlet.
7. Equipped with pressure controller: During the running of the
machine, if the working pressure exceed the setting value, the
machine will stop running automatically.
8. Equipped with emergency stop switch: During the running of the
machine, if there has any emergency situation, the machine will
stop running immediately.
9.Interlocking protection mechanism, connecting vacuum pump and
heater, avoiding blank pumping, blank heating, safe and reliable.
-0.06 ~- 0.095
3Phase, 380V, 50Hz(or as needed)
Electric heating power
Total electric power
Inlet (outlet) caliber
New oil≤15min,running oil≤30min
When it starts working, the used oil will be poured into the heater
to heat under the vacuum pressure, then the heated oil enter into
the primary filter which will eliminate the big impurities, then
the oil enter into the vacuum separator, the oil will flow the
special radiation device, which make the unit/volume oil to produce
a large surface area, lets the pollution oil exposure in the low
humidity atmosphere, thus the water, air and gas can be eliminated.
The treated vapor and gas form the gaseous mixture becomes the
liquid through the water tank and the chiller condensation, then
the liquid enters water receiver together, the vacuum extracts the
The oil which is drained away water flow into precision strainer
where can exhaust particulates (oil purification). According the
quantity of the water content, a whole purification needs many
times circulation to drain away the water.
Oil Data after Treatment
Moisture (water content)
(remove 100% of free water and 95%of dissolved/emulsified water)
Suspended Particles (Filtration precision)
≤1 ~ 5 micron
New oil≤15min, running oil≤30min
≤NAS 1638 Grade 5